MD534 Microfiber Fata Babban Haɗa Tire Kujerar Kujerar Haƙori
Kanfigareshan
| Kayan aikin hannu da aka dinka ultra-fiber upholstery na fata | Ƙirar kujera mai aiki tare |
| Kujera interlock tsarin | Ruwa-iska-lantarki tare da sarrafa kunnawa/kashe ɗaya |
| Ƙwaƙwalwar matsayi na kujera (9sets) | Matsayin kujera mai tofi |
| Fedal ɗin ƙafar ƙafar kayan alatu da yawa | Luxury LED aiki haske |
| Tire mai saman sama | Cikakken aikin kula da maɓalli 16 |
| Mai kallon fim X-ray | sirinji mai hanya 3 (sanyi) |
| Daidaitaccen tsotsa mai ƙarfi | Nau'in da aka gina (ba tare da akwatin bene ba) |
| Gilashin rotary cuspidor | Saliva ejector tare da babba da ƙananan tsotsa |
| Rushewar cuspidor ta atomatik & samar da ruwa tare da yawan zafin jiki | Tsaftace tsarin samar da ruwa |
| Multi-ayyukan sarrafawa panel tare da maɓalli 8 | sirinji mai hanya 3 (zafi) |
Tsarin
Abubuwan da ke cikin rukunin sune kujerar hakori, haɗin haɗin hannu, hasken aiki, tire mai aiki, sirinji na 3, raunin tsotsa, tsotsa mai ƙarfi, cuspidor, mai kallon fim na x-ray, ƙwallon ƙafa, ruwa da tsarin iska.An haɗa iska, ruwa da wutar lantarki na raka'a daga akwatin bene (ciki har da akwatin bene na waje ko ƙirar akwatin bene da aka gina a ciki).Akwatin bene ya ƙunshi bawul ɗin rage iska da tace ruwa, wanda shine don tsarkake iska, ruwa da wutar lantarki don raka'a.Ana kunnawa/kashe iska don duka kayan hannu masu tsayi da ƙananan gudu ana sarrafa su ta mai sarrafa ƙafa.Ruwa da iska don kowane kayan hannu, tsotsa mai ƙarfi da rauni ana sarrafa su ta hanyar bawul mai dacewa.Akwatin gefe tare da ginannen kwalban ruwa mai tsafta ya dace ga masu amfani don amfani da ruwa mai tsafta da canzawa tsakanin ruwan da aka tsarkake da ruwan famfo domin a iya tsawaita amfani da kayan hannu.
![])T%XWYAOGNUIA{N4N@(N~N](http://www.rvgshop.com/uploads/ed208c8f.png)
Bayanan Fasaha
| Tushen wutan lantarki | AC220V |
| Yawanci | 50Hz |
| Ƙarfin shigarwa | 800VA |
| Kujerar hakori ta ci gaba da ɗaukar lokaci | ≤2 min |
| Cigaba da lodin kujeran hakori | ≤60% (Lokacin aiki / tazara ta kujera) |
| Zazzabi ruwan zafi | 40+5°C |
| Canjin kafa | ZPX4 |
| Max.Rev.na turbin mai sauri | ≥300000r/min |
| Max.karfin fitarwa | ≥6g.cm (Tsarin iska: 0.22Mpa) |
| Max.Rev.na ƙananan motar motsa jiki | ≥20000r/min |
| Max.karfin fitarwa | ≥10g.cm (Tsarin iska: 0.3Mpa) |
| Shigar da karfin iska | 0.55 ~ 0.6MPa |
| Flux | ≥50L/min |
| Shigar da matsa lamba na ruwa | 0.2 ~ 0.4MPa |
| Max.lodin tiren kayan aiki | ≤30N |
Nunawa
